External Transmission Parts & Mounts

This side screw adjuster is how you adjust the pinion depth and backlash in your VW transmission.  This is an essential procedure when rebuilding your transmission or installing a limited slip differential. Fits all 1980-91 Vanagons with manual...

This Powerflex polyurethane transmission mount bushing is an excellent upgrade for 1.9L watercooled and 2.0L aircooled Vanagons with manual transmissions. THis bushing fits the smaller 59mm transmission mount. This kit will not fit vans with automatic...

This is the plastic cap that bolts to the transmission case and locks the adjusting ring into place. Fits all manual transmission Vanagons including Syncro. Ref ID: 091301197

When you find transmission oil inside your inner CV boot (as opposed to just CV grease), this will be the culprit. The part received may be a different color than pictured here. Not used on automatic transmission applications. Sold individually Ref ID:...

This bolt pulls double duty in the VW Vanagon It serves as the front differential mount in Syncros (horizontal cross bar and side mounts). This bolt does the horizontal cross bar to the differential and the two side mounts. This is also the transmission...

Differential flange lock ring behind drive flange cap and the differential flange concave washer. Two per car. Sold individually.

This washer/plate spreads the clamping force on the plastic cap located on the transmission behind the drive flanges.  The plastic cap locks the side screw adjusting ring into place. Fits all manual transmission Vanagons including Syncro. Also fits...

This is the fastener for the plastic lock plate that locks the transmission sidescrew adjusting ring. Fits all manual transmission Vanagons including Syncro. Two per cap, four per van.  Sold individuallyAlso fits Type 2 bus 1968 thru 79. Ref ID:...