Gaskets, Seals & Service

This automatic transmission cooler banjo bolt holds the cooler fittings to the cooler body. Two per van. This is the last of the last!  These bolts are no longer available from our vendors. When our supply is gone, that's it! Ref ID: 090409067  

Since a lot of the individual automatic transmission gaskets are not available anymore we are now offering this complete gasket set.This set includes:Qty Part Number Description 1 010 321 182 O-ring for the push rod 1 N  0282012 O-ring for the push...

Includes pan gasket, 1 screen, and paper gasket. You will also need ATF, but while you are servicing the automatic section, even if you are not servicing the final drive section, it is wise to at least check the fluid level in that section. Final drives...

There are two of these seals on the differential for the automatic transmission. Also, know as the pinion seals in the Bentley workshop manual. When these seals fail it allows the automatic transmission fluid to be pumped into the final drive section...

If you separate the final drive from the automatic section this large o-ring should be replaced. We used to sell this as a kit with the big horseshoe-shaped gasket, but it is no longer available separately. If you need the gasket you will need to buy the...

Automatic transmission - O-ring for the pinion shaft. Ref ID: 010409259A

This is the easiest of the automatic transmission leaks to fix. This o-ring is a common leak that is often misdiagnosed as a pan gasket. When it fails, transmissoin fluid drips around the perimeter of the pan making it look as though the pan is the...

0Ref ID: 003519089D

These are the seals that are on the side of the transmission behind the cups that the CV joints attach to. 2 per van Sold individually Same as the original 016.409.399B seal. Ref ID: 018409399