Add to Cart The item has been added Drop Link Bushing Sleeve This steel sleeve centers and supports the bushings on the drop link. One per side, two per van. Ref ID: 251411047 Shop by Diagram Hover over the icon and click to get the detail. $5.95 SKU: 002060 Add to Cart The item has been added
Add to Cart The item has been added Front Shock Dust Cover This front shock dust cover protects the rubber seal and piston of the front shocks from debris, preventing premature wear. Fits all models 1980-1991. One per shock, two per Van. Ref ID: 113412305 Shop by Diagram Hover over the icon... $5.95 SKU: 001727 Add to Cart The item has been added
Add to Cart The item has been added Rear Trailing Arm Nut This nut attaches the rear trailing arm in 1980-91 Vanagons. Fits both 2WD and Syncro. Four per van, sold individually. Ref ID: N10105507 $5.95 SKU: 003552 Add to Cart The item has been added
Add to Cart The item has been added Steering Rack Mount Bushings These steering rack mount bushings isolate the steering rack from road vibrations. There are four used per steering rack installation. Fit all 1980-1991 Vanagons with manual or power steering. Want a great upgrade in your Van's... $5.95 SKU: 002073 Add to Cart The item has been added
Add to Cart The item has been added Rear Shock Absorber Bolt This rear shock bolt is used in both the upper and lower mounting positions. Fits all models of Vanagon 1980-91. Four per van, sold individually. Ref ID: N0101652 Shop by Diagram Hover over the icon and click to get the detail. $4.95 SKU: 003477 Add to Cart The item has been added
Sold out Out of stock Steering Column Flange Bushing Steering column flange bushings go where the upper part of the column mates to the lower column with alignment pins. These bushings ensure a tight fit for the pins and we recommend replacing them when you have your steering column apart for service. Fits... $4.95 SKU: 002911 Out of stock
Sold out Out of stock Upper Control Arm Washer This upper control arm washer lives under the upper control arm nut that affixes the arm to the chassis. Fits all vans 1980-1991. Two per van, sold separately. Please note that these are not the eccentric washers that are on the control arm bolts... $4.95 SKU: 002025 Out of stock
Add to Cart The item has been added Front Axle Locking Nut - 2WD Replacing this front locking axle nut when you replace your rotor or wheel bearings is cheap insurance. This nut is peened with a hammer and small punch during installation. Repeated re-use of old nut weakens its shoulder, causing it to... $4.75 SKU: 002051 Add to Cart The item has been added
Add to Cart The item has been added Rear Control Arm Bolt Washer Rear control arm bolt washer. Fits all years and configurations of the VW T3 Vanagon. Eight washers per vehicle. Sold individually. Ref ID: 481501543 $3.95 SKU: 002773 Add to Cart The item has been added
Add to Cart The item has been added Rubber Mount for Fuel Pump or Power Steering Hose Aftermarket fuel pump mount. We finally found an alternative to the VW dealer expensive mounts. 2 per van. Sold individually.Also used for power steering hose mounts 2 per van. Ref ID: 113142355B-AFT Shop by Diagram Hover over the icon and click to... $3.95 SKU: 001722 Add to Cart The item has been added
Add to Cart The item has been added Syncro Upper Control Arm Eccentric Washer 6.0mm This eccentric washer is used to align the front suspension in Syncro Vanagons. It is used in conjunction with the upper control arm bolt to set the camber in the front end. The width of the space this washer sits in is critical for the alignment... $3.95 SKU: 002030 Add to Cart The item has been added
Add to Cart The item has been added Syncro Upper Control Arm Eccentric Washer 6.5mm This eccentric washer is used to align the front suspension in Syncro Vanagons. It is used in conjunction with the upper control arm bolt to set the camber in the front end. The width of the space this washer sits in is critical for the alignment... $3.95 SKU: 002031 Add to Cart The item has been added
