Fuel Delivery

This fuel tank breather grommet is an essential component of the fuel tank breather system in your 2WD Vanagon.  There are three grommets used per van:  two for the crossover pipe on top of the tank and one for the filler neck vent tube. We...

Aftermarket fuel pump mount. We finally found an alternative to the VW dealer expensive mounts. 2 per van. Sold individually.Also used for power steering hose mounts 2 per van. Ref ID: 113142355B-AFT Shop by Diagram Hover over the icon and click to...

This seal fits all 2WD models 1980-1991. This is an aftermarket seal black in color and is similar to the seal that comes with the sending unit. At Van Cafe, we prefer the original OEM Volkswagen seal available here.   Ref ID:...

Sold by the foot. 7.9mm Fuel line is the pressurized line for fuel delivery to and around the engine (30R14 rating rates the same as J30R9 with a new nylon interior barrier to prevent bio-diesel from soaking through). It is not the fuel line that is used...

Use this T connector when resealing the gas tank on your Syncro. It also fits all 2wd 80 thru 91 between the plastic hoses between the fuel expansion tanks. Original VW-made in plastic. Ref ID: 113127563

This is the grommet between the top of the filler neck vent tube and the filler neck. It also fits the brake booster vacuum system in several places. Ref ID: 211611833D

This circlip lives on the end of the accelerator kickdown lever for the automatic transmission. Fits 1980-91 Vanagons with automatic transmissions. Ref ID: N0123254

Sold by the foot, this 6.3mm fuel line is used on the fuel tank breather/vapor system and replaces the original 5mm hose. It is not the fuel line that runs to the engine. Made by Gates. Ref ID: 27068

These are the smooth clamps (non-serrated) that we recommend using the rubber fuel line (not cloth). There are approx. 20 clamps if you are replacing all of the clamps for the pressurized lines. (This clamp is also the clamp we recommend using with our...

Excellent quality stainless steel pinch clamp. These are commonly used to seal the fuel expansion tank hoses to the plastic lines that run from fuel tank to expansion tank in your Vanagon. Note: these are Oetiker style pinch clamps.  You'll need a...

Stainless steel hose and tube clamp.  Commonly used in the VW T3 Vanagon to clamp the fuel vapor hoses which run from the fuel tank to the fuel expansion tanks in the front wheel wells.  Clamping range - 11.5-14.00 mmThis is an Oetiker-style...