CV Axles & Components

This boot is used on all vans including Syncro for the rear axles. In a pinch, it can be used for the Syncro front inner, but we prefer to use the stock Syncro Front Boot Kit in conjunction with the stock Syncro flange or the Rockford boot. In our...

CV Bolt Lock Plate used on all model Vanagons 1980-1991. If you need the serrated washers, please click here. If you need some CV bolts, please click here.Ref ID: 1J0407357A

Excellent quality grease for use in installing new CV joints or replaceing your worn CV boots.  This grease packet is the same grease that comes in our GKN CV joint kits. If you prefer high-quality Redline grease please click here. Note: Although...

This CV boot clamp lives at the small end of each of the CV joints in all Vanagons from 1980-1991. This clamp is included in our CV joint and CV boot kits as well. This is an oetiker style pinch clamp which is the most reliable in this application. ...

VW originally used 12-point triple square bolts on all the factoryCV joints, however often people replace them with six-point bolts.  The 12-point bolt provides more points of contact for your removal tool and therefore we recommend the 12-point...

This CV bolt washer is serrated to lock the bolt in place when torqued.  We recommend replacing your serrated washers when replacing your CV joints or boots, especially if the teeth on yours have become dull. Used on all 2WD and Syncro model...