Propex Heaters

This Propex thermostat control wiring harness fits HS2000 and HS2800 heaters manufactured from April 2015 to current.  While thermostat harnesses don't typically go bad, we offer this harness in case yours is physically damaged or if you are...

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

90mm 90-degree ducting fitting for use when plumbing Whale GTR-10 or GTR-15 space heaters.  This fitting allows a robust connection when passing the ducting through the floor of your vehicle. Click here for more info on the awesome Whale GTR-10 and...

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly recommend installing the long straight top of the tee...

This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting simply slides into either end of the fitting.

Propex 12V power loom for HS2000 and HS2800 heaters manufactured after 2010. Fitment Notes: Approx. 11 feet in length Two wire, three-pin connector You will need to install a 5A inline fuse into the 12V power wire to protect your heater. Reinstalling a...

Due to its unique design, the Propex HS2211 uses a different ducting system than the other Propex heaters.   These 65mm outlet vents screw directly into this straight connector.   The 60mm weatherproof ducting is then inserted into...