Ducting, Vents, Combustion Pipes

Cool your jets!  Under normal operation, the Propex heater combustion exhaust pipe doesn't get hot enough to cause a safety issue, especially if you avoid routing it around combustible material.  If you want EXTRA heat protection, we offer this...

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

Propex 22mm-25mm silicone straight connector. High temperature silicone, this connector connects the combustion exhaust pipe to the HS2000 and HS2211 heaters. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on both side...

This high temperature Propex silicone connector connects the exhaust and intake combustion pipes to the HS2800 heater. Features: 25.5mm-30mm straight connector Rated to 500F Ref ID: 2986118

65mm open/close vent for Propex and Whale heater installations.  Terminate your 60mm ducting by inserting into this vent.  Beige in color.

90mm 90-degree ducting fitting for use when plumbing Whale GTR-10 or GTR-15 space heaters.  This fitting allows a robust connection when passing the ducting through the floor of your vehicle. Click here for more info on the awesome Whale GTR-10 and...

This Propex directional vent is used with either the 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting of the heater install. You would use this vent in the case that you want more than one vent in your installation. Use of...

Are you imagining a custom installation of your Propex heater ducting?  This Y-junction allows you to create a branch for a separate outlet to distribute your heater output. Fitment notes: Must be used in conjuntion with either the 60mm adapter...

This 90mm to 65mm reducer allows you to convert from 90mm to 60mm ducting in your Whale heater installation.