Propex Heaters

This Propex thermostat harness extension is approx 3.5 meters (11.5 feet) This harness is an extension harness only. It attaches to your thermostat harness on one end and your thermostat on the other. For current model HS2000, HS2211 and HS2800 model...

Cool your jets!  Under normal operation, the Propex heater combustion exhaust pipe doesn't get hot enough to cause a safety issue, especially if you avoid routing it around combustible material.  If you want EXTRA heat protection, we offer this...

If the end cap on your HS2211 is damaged, we recommend replacement to keep your unit from dust contamination. New seal included!   Ref ID: 2986166

This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting simply slides into either end of the fitting.

This Propex fixed directional vent is used with either 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting during heater installation. You would use this vent in the case that you want more than one vent in your installation...

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

Propex 22mm-25mm silicone straight connector. High temperature silicone, this connector connects the combustion exhaust pipe to the HS2000 and HS2211 heaters. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on both side...