Propex Heaters

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

Propex 25.5mm-30mm Straight ConnectorHigh temperature silicone, this connector connects the combustion exhaust pipe to the HS2800 heaters combustion outlet. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on both side of...

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly recommend installing the long straight top of the tee...

Want to use a flared connection when installing a Propex heater into your vehicle?  Here's the solution! This adapter fitting screws into your HS2000 or HS2800 and attaches to your 3/8" flared propane supply line. 3/8" Flare to BSPT High quality...

Propex 12V power loom for HS2000 and HS2800 heaters manufactured after 2010. Fitment Notes: Approx. 11 feet in length Two wire, three-pin connector You will need to install a 5A inline fuse into the 12V power wire to protect your heater. Reinstalling a...

Due to its unique design, the Propex HS2211 uses a different ducting system than the other Propex heaters.   These 65mm outlet vents screw directly into this straight connector.   The 60mm weatherproof ducting is then inserted into...