This is a new Lobro Joint(GKN) made in Germany. The inner race of the joint has a beveled(chamfered) edge that faces inward. CV joint usually comes with a concave washer which is not used.

*Please note that the GKN/Lobro CV joints will not fit the Chinese axles on the market.*

Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!

Ref ID: 211501331B