This CV bolt washer is serrated to lock the bolt in place when torqued.  We recommend replacing your serrated washers when replacing your CV joints or boots, especially if the teeth on yours...

VW originally used 12-point triple square bolts on all the factoryCV joints, however often people replace them with six-point bolts.  The 12-point bolt provides more points of contact for your...

High strength hardware to install your CV axle. 12 bolts and 12 serrated washers Fits for both 2WD and 4WD axles 12-point triple-square bolts as original If replacing both axles, you'll need two...

Our convenient CV bolt kit comes with everything you need to install an axle in your Vanagon. Our kit contains: (12) Hardened 12-point CV joint bolts (12) Serrated washers 12-point triple square...

This differential lock actuator bolt replaces your factory original.  Most often you can use your original but sometimes it is too corroded.   Fits 1986-1991 Syncros with differential...

This bolt is used in two very different applications in the Vanagon: In Syncros it secures the inner cv joint on the front axle to the differential. In 2.1L 2WD vans it serves as the upper bolt in...