New inner or outer rear CV joint kit for the rare Syncro 16" with 108mm joints. If you need the serrated washers, please click here.

*Please note that the GKN/Lobro CV joints will not fit the Chinese axles on the market.*

Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!

Ref ID: 431498103C